ROOF REPAIR

AGM Truck

Roof repair is important to keeping your investment safe and equitable. Over time, your roof will naturally show wear and tear, so it is important that roof maintenance is performed to prevent structural damage. AMG Roofing specializes in roof repair and maintenance in Marion County. AMG roofing professionals will assist you with all of your home’s roofing and maintenance requirements.

  • AGM Icon
    Nails Popping
  • AGM Icon
    Wrong flat roofing systems
  • AGM Icon
    Old chimney flashing
  • AGM Icon
    Wrong roof stack flashing
  • AGM Icon
    Roofing shingles or roof stack flashing lifting
  • AGM Icon
    Flashing short or bent
  • AGM Icon
    Flat roofing material not torched down
  • AGM Icon
    Too much caulking
  • AGM Icon
    Improper finishes around electrical posts, chimney or vents
  • AGM Icon
    Not properly finished
  • AGM Icon
    Wrong rubber
  • AGM Icon
    Bathroom vent connected to roof stacking

The most common roof repair is due to roof leaks. Unfortunately, roof leaks aren’t always easy to spot, once a roof leak occurs, a water spot appears on ceilings or walls and by then the damage has been done. Let AMG Roofing Specialists inspect your roof for damages and make the necessary roof leak repairs to prevent future roof leaks.

Shingles

Shingles are a popular roofing material and are inexpensive to replace. Loose shingles or shingles not properly affixed to the roof can lead to roof leaks. A strong gust of wind or storms such as hurricanes can leave the roof exposed and promote roof leaking.

  • AGM Icon
    Blistering is the result of moisture being trapped in the asphalt or the roof is not properly ventilated. These hot spots can leave the roof vulnerable to leaks.
  • AGM Icon
    Shrinking occurs when the roof membrane shrinks causing the shingles and flashing to pull apart. This can cause cracks, blisters, and splits that let water pass through the roof damaging the house structure.
  • AGM Icon
    Curling is where shingles curl up at the edges as a result of improper ventilation, installation, or age.
  • AGM Icon
    Cracking or thermal splitting is caused by defects, improper installation, extreme weather conditions.

Flashing

Flashing is the aluminum wrap that is installed along the roof’s protrusions whose job it is to divert water. Flashing helps to prevent roof leaking, rotting, and pooling. Damaged flashing can lead to roof leaks or damage to gutters, attics, and ventilation systems. Proper roof maintenance can help roof experts prevent future flashing roof repairs.

Roof Flashing
Properly Installed Roof Flashing

Installation Quality

Installation Quality can be a huge factor in the type of protection a roof gives to the structure of a home. Often, these repairs are covered under warranty. Common installation problems are:

  • AGM Icon
    Nails under or over driven.
  • AGM Icon
    Too much caulking or tar used.
  • AGM Icon
    Using incorrect or poor-quality materials.
  • AGM Icon
    Wrong placement of materials such as flashing and vents.

A Weakened Roof

A Weakened Roof can be the result of a myriad of damage. Popular causes of weakening in the roof are storm damage, hail damage, tree limbs damage, or sharp object punctures. Storm damage repairs should be completed immediately.

Roof Weak from Storm Damage